Room Cooler/Heater

Room Cooler/Heater

To manage temperature anywhere in the hatchery


An efficient, economical solution to temperature management anywhere in the hatchery. The room cooler/heater may be used either to warm in the winter by ventilating warm air - or to cool in the summer by circulating fresh air. Its fan motor assembly incorporates Rotorex technology and a streamlined impeller, for improved air handling efficiency and reduced noise levels. Ideally suited to dry rooms and transfer rooms, the unit can also be used in a fresh air plenum (air supply tunnel) for fine-tuning incoming air from the air handling unit, prior to supplying setters or hatchers. Supplied with a single row heat exchanger for hot water supply, or with a triple row heat exchanger for cold water supply.

How it works

  • The room cooler/heater is either used as a cooling or heating unit (single purpose)
  • Hot or cold water is supplied to the coil inside the unit
  • Incoming air is either heated up or cooled down as it passes the hot or cold coil
  • The temperature sensor inside the room starts and stops the unit automatically

Technical specifications

Installed power 
Air flow 
Dimensions (WxHxD)   
Sound level

Heating unit 
> 20 kW 
> 150 W 
> 2075 m3 / hour 
> 713 x 460 x 420 mm 
> 25 kg 
> 48 dB(A)
Cooling unit 
> 10 Kw 
> 370 W 
> 5,960 m3 / hour 
> 1115 x 874 x 470 mm 
> 69 kg 
> 53 dB(A)
IP Marking 
> Galvanised, precoated steel casing 
> IP54 
> A built-in condensate drain pan with perforated bottom and quick connection fitting 
> Each unit is single purpose, installed either to heat or to cool